Category: 1455-77-2

Peng, An-Zhong published the artcileN-doped porous carbons derived from a polymer precursor with a record-high N content: Efficient adsorbents for CO2 capture, Recommanded Product: 3,5-Diamino-1,2,4-triazole, the main research area is nitrogen doped porous carbon polymer precursor; adsorbent carbon dioxide capture.

N-doped porous carbons (NPCs) are characterized by well-developed porosity and N-doped active sites, which makes them suitable for CO2 capture. However, their application in practice is obstructed by the relatively low N-doped content and unsatisfactory adsorption capacity. Herein, we report the synthesis of NPCs through the rational design of the precursor NUT-21 (NUT means Nanjing Tech University) with a record-high N content (up to 46.16%, wt). The NUT-21 was fabricated by the polymerization of two simple monomers of 2,4,6-tris(bromomethyl)mesitylene and 3,5-diamino-1,2,4-triazole with an unusually high N content of 70.67% (wt). With the carbonization of NUT-21 at different temperatures (500, 600, and 700°, resp.), a series of NPCs possessing various porosity and N contents are produced, successfully. For the NPC generated at 600°, the N content can reach 7.41% (wt), the surface area is 2208 m2/g, the micropore volume is 0.791 cm3/g, and the CO2 capacity is up to 8.3 mmol/g at 273 K and 1 bar, which is much higher than those of benchmarks including 13X zeolite (4.1 mmol/g) and activated carbon (2.8 mmol/g), and most carbon-based adsorbents reported till now. It was proved in our previous studies that the ultrahigh N content of the precursor was beneficial for both the formation of developed porosity and the generation of abundant N-doped sites, which can give rise to superior capacity and selectivity of CO2 capture. The NPCs obtained may offer to be highly promising candidates for CO2 separation from gas mixtures including natural gas and flue gas.

Chemical Engineering Journal (Amsterdam, Netherlands) published new progress about Adsorption. 1455-77-2 belongs to class isoquinoline, name is 3,5-Diamino-1,2,4-triazole, and the molecular formula is C2H5N5, Recommanded Product: 3,5-Diamino-1,2,4-triazole.

Referemce:
Isoquinoline – Wikipedia,
Isoquinoline | C9H7N – PubChem

Polunin, K. E. published the artcileDetection and Neutralization of Unsymmetrical Dimethylhydrazine on the Surface of Construction Materials, Application of 3,5-Diamino-1,2,4-triazole, the main research area is neutralization dimethylhydrazine construction material ozonation.

The construction materials that contacted with unsym. dimethylhydrazine and the desorption solutions obtained when treating the contaminated surface of metals and alloys with water and reagents were studied by chromatog. and mass spectrometry. Neutralization of unsym. dimethylhydrazine was studied using ozone and shungite. Ozonation makes it possible to destroy the toxicant mols. chem. and phys. adsorbed on the surface of metal constructions, due to which they can be reused and utilized. Shungite effectively adsorbs and catalytically decomposes not only unsym. dimethylhydrazine and its transformation products, but also oligomer compounds formed during the storage of hydrazine fuel. Ozonation of spent shungite can increase the efficiency of destructive processes and completeness of its regeneration.

Russian Journal of Physical Chemistry A published new progress about Adsorption. 1455-77-2 belongs to class isoquinoline, name is 3,5-Diamino-1,2,4-triazole, and the molecular formula is C2H5N5, Application of 3,5-Diamino-1,2,4-triazole.

Referemce:
Isoquinoline – Wikipedia,
Isoquinoline | C9H7N – PubChem

Polunin, K. E. published the artcileDetection and Neutralization of Unsymmetrical Dimethylhydrazine on the Surface of Construction Materials, COA of Formula: C2H5N5, the main research area is neutralization dimethylhydrazine construction material ozonation.

The construction materials that contacted with unsym. dimethylhydrazine and the desorption solutions obtained when treating the contaminated surface of metals and alloys with water and reagents were studied by chromatog. and mass spectrometry. Neutralization of unsym. dimethylhydrazine was studied using ozone and shungite. Ozonation makes it possible to destroy the toxicant mols. chem. and phys. adsorbed on the surface of metal constructions, due to which they can be reused and utilized. Shungite effectively adsorbs and catalytically decomposes not only unsym. dimethylhydrazine and its transformation products, but also oligomer compounds formed during the storage of hydrazine fuel. Ozonation of spent shungite can increase the efficiency of destructive processes and completeness of its regeneration.

Russian Journal of Physical Chemistry A published new progress about Adsorption. 1455-77-2 belongs to class isoquinoline, name is 3,5-Diamino-1,2,4-triazole, and the molecular formula is C2H5N5, COA of Formula: C2H5N5.

Referemce:
Isoquinoline – Wikipedia,
Isoquinoline | C9H7N – PubChem

Loloei, Mahsa published the artcilePostsynthetic Modification of Zn/Co-ZIF by 3,5-Diamino-1,2,4-triazole for Improved MOF/Polyimide Interface in CO2-Selective Mixed Matrix Membranes, Related Products of isoquinoline, the main research area is postsynthetic diaminotriazole MOF polyimide interface CO2 matrix membrane.

Amine-functionalized zeolite imidazolate frameworks (ZIF) are known to improve the mixed matrix membranes (MMM) separation performances for CO2/CH4 applications. In this study, 3,5-diamino-1,2,4-triazole, a ligand with -NH2 functionality and uncoordinated -NH group, was used in the postsynthetic modification of dual metal Zn/Co-ZIF for partial substitution of 2-methylimidazole to obtain a biligand Zn/Co-ZIF (Zn/Co-TZ1h) with retained crystallinity, tunable pore size and enhanced CO2 adsorption capacity. A series of mixed matrix membranes were then fabricated at a single concentration (7.5 wt %) of parent Zn/Co-ZIF or Zn/Co-TZ1h in 6FDA-ODA or Matrimid polyimides to compare the effect of modified ZIF to its unmodified analog on the MMM properties and CO2/CH4 separation performance. Zn/Co-TZ1h MMM showed enhanced mech. properties and better filler integration into the polymer matrix as a result of better interfacial interactions via hydrogen bonding while retaining the same thermal stability as Zn/Co-ZIF MMM. Moreover, the combination of ZIF gate size control, improved size discrimination, and specific chem. interaction gave the NH2-functionalized Zn/Co-ZIF MMM the possibility to significantly overcome the CO2/CH4 separation performance of the pure polymer. Postsynthetic modification of ZIF by amine-functionalized ligands can be an effective strategy to improve the filler/polymer interface quality resulting in improved MMM separation properties.

Industrial & Engineering Chemistry Research published new progress about Adsorption. 1455-77-2 belongs to class isoquinoline, name is 3,5-Diamino-1,2,4-triazole, and the molecular formula is C2H5N5, Related Products of isoquinoline.

Referemce:
Isoquinoline – Wikipedia,
Isoquinoline | C9H7N – PubChem

Loloei, Mahsa published the artcilePostsynthetic Modification of Zn/Co-ZIF by 3,5-Diamino-1,2,4-triazole for Improved MOF/Polyimide Interface in CO2-Selective Mixed Matrix Membranes, Related Products of isoquinoline, the main research area is postsynthetic diaminotriazole MOF polyimide interface CO2 matrix membrane.

Amine-functionalized zeolite imidazolate frameworks (ZIF) are known to improve the mixed matrix membranes (MMM) separation performances for CO2/CH4 applications. In this study, 3,5-diamino-1,2,4-triazole, a ligand with -NH2 functionality and uncoordinated -NH group, was used in the postsynthetic modification of dual metal Zn/Co-ZIF for partial substitution of 2-methylimidazole to obtain a biligand Zn/Co-ZIF (Zn/Co-TZ1h) with retained crystallinity, tunable pore size and enhanced CO2 adsorption capacity. A series of mixed matrix membranes were then fabricated at a single concentration (7.5 wt %) of parent Zn/Co-ZIF or Zn/Co-TZ1h in 6FDA-ODA or Matrimid polyimides to compare the effect of modified ZIF to its unmodified analog on the MMM properties and CO2/CH4 separation performance. Zn/Co-TZ1h MMM showed enhanced mech. properties and better filler integration into the polymer matrix as a result of better interfacial interactions via hydrogen bonding while retaining the same thermal stability as Zn/Co-ZIF MMM. Moreover, the combination of ZIF gate size control, improved size discrimination, and specific chem. interaction gave the NH2-functionalized Zn/Co-ZIF MMM the possibility to significantly overcome the CO2/CH4 separation performance of the pure polymer. Postsynthetic modification of ZIF by amine-functionalized ligands can be an effective strategy to improve the filler/polymer interface quality resulting in improved MMM separation properties.

Industrial & Engineering Chemistry Research published new progress about Adsorption. 1455-77-2 belongs to class isoquinoline, name is 3,5-Diamino-1,2,4-triazole, and the molecular formula is C2H5N5, Related Products of isoquinoline.

Referemce:
Isoquinoline – Wikipedia,
Isoquinoline | C9H7N – PubChem

Liu, Chuanyao published the artcilePost-synthesis of a covalent organic framework nanofiltration membrane for highly efficient water treatment, Application of 3,5-Diamino-1,2,4-triazole, the main research area is covalent organic framework nanofiltration membrane water.

Nanofiltration (NF) membranes with ultrahigh water flux and high ion rejection are substantially beneficial for desalination and wastewater treatment. However, synthesis of NF membranes with high water permeance while maintaining high ion rejection remains a great challenge. Herein, we report a highly stable covalent organic framework (COF) IISERP-COOH-COF1 membrane with high ion rejection and relatively high water flux. Through post-modification, the pore aperture of the IISERP-COOH-COF1 membrane can be constricted, thus preventing ions from accessing the pores. Further, covalent post-functionalization is helpful to reduce non-selective transport through invisible intercrystalline defects, thus enhancing salt rejection. Demonstrated by both exptl. and simulation studies, the IISERP-COOH-COF1 membrane shows superior ion rejection (e.g., 96.3% for Na2SO4, 97.2% for MgSO4, 99.6% for FeCl3, 90.6% for MgCl2, and 82.9% for NaCl) based on size exclusion, with a water flux above 0.5 L m-2 h-1 bar-1.

Journal of Materials Chemistry A: Materials for Energy and Sustainability published new progress about Adsorption. 1455-77-2 belongs to class isoquinoline, name is 3,5-Diamino-1,2,4-triazole, and the molecular formula is C2H5N5, Application of 3,5-Diamino-1,2,4-triazole.

Referemce:
Isoquinoline – Wikipedia,
Isoquinoline | C9H7N – PubChem

Liu, Chuanyao published the artcilePost-synthesis of a covalent organic framework nanofiltration membrane for highly efficient water treatment, Category: isoquinoline, the main research area is covalent organic framework nanofiltration membrane water.

Nanofiltration (NF) membranes with ultrahigh water flux and high ion rejection are substantially beneficial for desalination and wastewater treatment. However, synthesis of NF membranes with high water permeance while maintaining high ion rejection remains a great challenge. Herein, we report a highly stable covalent organic framework (COF) IISERP-COOH-COF1 membrane with high ion rejection and relatively high water flux. Through post-modification, the pore aperture of the IISERP-COOH-COF1 membrane can be constricted, thus preventing ions from accessing the pores. Further, covalent post-functionalization is helpful to reduce non-selective transport through invisible intercrystalline defects, thus enhancing salt rejection. Demonstrated by both exptl. and simulation studies, the IISERP-COOH-COF1 membrane shows superior ion rejection (e.g., 96.3% for Na2SO4, 97.2% for MgSO4, 99.6% for FeCl3, 90.6% for MgCl2, and 82.9% for NaCl) based on size exclusion, with a water flux above 0.5 L m-2 h-1 bar-1.

Journal of Materials Chemistry A: Materials for Energy and Sustainability published new progress about Adsorption. 1455-77-2 belongs to class isoquinoline, name is 3,5-Diamino-1,2,4-triazole, and the molecular formula is C2H5N5, Category: isoquinoline.

Referemce:
Isoquinoline – Wikipedia,
Isoquinoline | C9H7N – PubChem

Ding, Hongliang published the artcileHighly flame retardant, low thermally conducting, and hydrophobic phytic acid-guanazole-cellulose nanofiber composite foams, Formula: C2H5N5, the main research area is phytic acid guanazole cellulose nanofiber composite foam.

Cellulose as a bio-based material has attracted increasing attention due to its excellent properties. However, cellulose is very flammable and it is necessary to impart flame retardancy to cellulose nanofiber (CNF) foams. In this work, phytic acid (PA)-guanazole (GZ)-CNF composite foams were prepared by a simple freeze-drying method. SEM images indicated that the resultant PA-GZ-CNF composite foams exhibited a hierarchical porous structure. Moreover, the introduction of PA and GZ slightly affected the thermal conducting property of CNF foams. PA-GZ-CNF composite foams possessed excellent flame retardancy with a much higher LOI value and a UL-94 V-0 rating compared to that of pure CNF foams. Moreover, the peak of the heat release rate of PA-GZ-CNF composite foams exhibited a significant decrease from 57.80 to 29.27 kW/m2 and the total heat release declined from 2.10 to 1.21 MJ/m2. PA-GZ-CNF composite foams formed a protective char layer covered on the surface, which produced less thermal decomposition volatiles and prevented the spread of pyrolysis products into the gas phase. Addnl., PA-GZ-CNF composite foams achieved hydrophobicity with a water contact angle of 104.0° after hydrophobic treatment without sacrificing their flame retardancy.

Cellulose (Dordrecht, Netherlands) published new progress about Absorption. 1455-77-2 belongs to class isoquinoline, name is 3,5-Diamino-1,2,4-triazole, and the molecular formula is C2H5N5, Formula: C2H5N5.

Referemce:
Isoquinoline – Wikipedia,
Isoquinoline | C9H7N – PubChem

Ding, Hongliang published the artcileHighly flame retardant, low thermally conducting, and hydrophobic phytic acid-guanazole-cellulose nanofiber composite foams, Related Products of isoquinoline, the main research area is phytic acid guanazole cellulose nanofiber composite foam.

Cellulose as a bio-based material has attracted increasing attention due to its excellent properties. However, cellulose is very flammable and it is necessary to impart flame retardancy to cellulose nanofiber (CNF) foams. In this work, phytic acid (PA)-guanazole (GZ)-CNF composite foams were prepared by a simple freeze-drying method. SEM images indicated that the resultant PA-GZ-CNF composite foams exhibited a hierarchical porous structure. Moreover, the introduction of PA and GZ slightly affected the thermal conducting property of CNF foams. PA-GZ-CNF composite foams possessed excellent flame retardancy with a much higher LOI value and a UL-94 V-0 rating compared to that of pure CNF foams. Moreover, the peak of the heat release rate of PA-GZ-CNF composite foams exhibited a significant decrease from 57.80 to 29.27 kW/m2 and the total heat release declined from 2.10 to 1.21 MJ/m2. PA-GZ-CNF composite foams formed a protective char layer covered on the surface, which produced less thermal decomposition volatiles and prevented the spread of pyrolysis products into the gas phase. Addnl., PA-GZ-CNF composite foams achieved hydrophobicity with a water contact angle of 104.0° after hydrophobic treatment without sacrificing their flame retardancy.

Cellulose (Dordrecht, Netherlands) published new progress about Absorption. 1455-77-2 belongs to class isoquinoline, name is 3,5-Diamino-1,2,4-triazole, and the molecular formula is C2H5N5, Related Products of isoquinoline.

Referemce:
Isoquinoline – Wikipedia,
Isoquinoline | C9H7N – PubChem

Bian, Jianqing published the artcileN-doped graphitized porous carbon derived from N-rich polymer for improved supercapacitor performance, Safety of 3,5-Diamino-1,2,4-triazole, the main research area is potassium ferrate nitrogen doped graphitized porous carbon energy storage.

Porous carbons with the large sp. surface area, high elec. conductivity as well as abundant heteroatom doping are regarded as a promising candidate for supercapacitor applications. In this report, a facile potassium ferrate (K2FeO4) activation strategy is adopted to transform the N-rich Schiff-based polymer into N-doped graphitized porous carbons (NGPCs) by the synchronous activation and graphitization. The optimized NGPC-700-1 sample delivers a delightful capacitance of 322.7 F g-1 at 0.5 A g-1 and an excellent rate capability (79.1% capacitance retained at 50 A g-1) in 6 M KOH due to the unique laminated and porous structure with the large surface area (2123.7 m2 g-1), high porous volume (1.30 cm3 g-1) and abundant N/O dopant (6.20/8.20 at%). Moreover, the assembled sym. supercapacitor achieves a high energy d. of 21.5 W h kg-1 at the power supply of 445.5 W kg-1 in 1 M Na2SO4 electrolyte. Therefore, NGPCs derived from one-step activation/graphitization of N-rich polymer represent a promising route for preparing porous carbon materials with the high charge storage capacity and rate capability in the energy storage.

New Journal of Chemistry published new progress about Absorption. 1455-77-2 belongs to class isoquinoline, name is 3,5-Diamino-1,2,4-triazole, and the molecular formula is C2H5N5, Safety of 3,5-Diamino-1,2,4-triazole.

Referemce:
Isoquinoline – Wikipedia,
Isoquinoline | C9H7N – PubChem