Brief introduction of 4456-77-3

The synthetic route of 4456-77-3 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4456-77-3,Isoquinoline-1,3(2H,4H)-dione,as a common compound, the synthetic route is as follows.,4456-77-3

EXAMPLE IX 1,3(2H,4H)-Dioxoisoquinoline-4-carboxanilide A solution containing 1,3(2H,4H)-dioxoisoquinoline (4.0 g., 0.025 mole), triethylamine (2.6 g., 0.026 mole) and phenylisocyanate (3.1 g., 0.026 mole), in 100 ml. of tetrahydrofuran was refluxed for 2 hours. The solution was then poured into an excess of ice water containing 5 ml. of hydrochloric acid. The resulting precipitate was collected by filtration, washed with water, dried and recrystallized from acetic acid, to give 1,3(2H,4H)-dioxoisoquinoline-4-carboxanilide, m.p. 249-250 C. Anal. Calc’d for C16 H11 N2 O3: C, 68.56; H, 4.32; N, 10.00. Found: C, 68.86; H, 4.37; N, 9.80.

The synthetic route of 4456-77-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Pfizer Inc.; US3998954; (1976); A;,
Isoquinoline – Wikipedia
Isoquinoline | C9H7N – PubChem

 

Downstream synthetic route of 4456-77-3

As the paragraph descriping shows that 4456-77-3 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4456-77-3,Isoquinoline-1,3(2H,4H)-dione,as a common compound, the synthetic route is as follows.,4456-77-3

A mixture of homophthalimide (770 mg, 4.78mmol), 4-pyridinecarboxaldehyde (0.469 mL, 4.78 mmol) and piperidine (0.5 mL) in acetic acid (25 mL) was heated at reflux for 1 h. The resultant solution was cooled to room temperature. The solid product was removed by filtration, washed by water (4 x 10 mL) and dried under vacuum to afford 920 mg (3.67 mmol, 77 % yield ) of a mixture of Z and E isomers of the above compound. 1H-NMR (DMSO-de) complex proton signals shown in aromatic region due to existence of both E and Z isomers. MS ES 251 (M+H)+, 252 (M+2H)+.

As the paragraph descriping shows that 4456-77-3 is playing an increasingly important role.

Reference£º
Patent; BAYER HEALTHCARE AG; WO2007/118602; (2007); A1;,
Isoquinoline – Wikipedia
Isoquinoline | C9H7N – PubChem

 

Some tips on 4456-77-3

4456-77-3 Isoquinoline-1,3(2H,4H)-dione 349435, aisoquinoline compound, is more and more widely used in various fields.

4456-77-3, Isoquinoline-1,3(2H,4H)-dione is a isoquinoline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,4456-77-3

EXAMPLE 60B 1,3-dichloroisoquinoline The product from Example 60A (6.5 g, 40.4 mmol) was treated with phenylphosphonic dichloride (11.5 mL, 81.1 mmol) and heated at 160 C. for 3 hours. The reaction was allowed to cool to room temperature and stand overnight. The resulting waxy orange material was dissolved in tetrahydrofuran (200 mL), treated with water (60 mL), and then concentrated under reduced to remove the tetrahydrofuran. The remaining aqueous material was neutralized with concentrated NH4OH and extracted with ethyl acetate. The ethyl acetate phases were combined, washed with water, brine, dried over Na2SO4 and concentrated under reduced pressure to provide the title compound as yellow flakes (6.92 g, 74%).

4456-77-3 Isoquinoline-1,3(2H,4H)-dione 349435, aisoquinoline compound, is more and more widely used in various fields.

Reference£º
Patent; Abbott Laboratories; US6933311; (2005); B2;,
Isoquinoline – Wikipedia
Isoquinoline | C9H7N – PubChem

 

Simple exploration of 4456-77-3

4456-77-3 Isoquinoline-1,3(2H,4H)-dione 349435, aisoquinoline compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4456-77-3,Isoquinoline-1,3(2H,4H)-dione,as a common compound, the synthetic route is as follows.,4456-77-3

EXAMPLE 60B 1,3-dichloroisoquinoline The product from Example 60A (6.5 g, 40.4 mmol) was treated with phenylphosphonic dichloride (11.5 mL, 81.1 mmol) and heated at 160 C. for 3 hours. The reaction was allowed to cool to room temperature and stand overnight. The resulting waxy orange material was dissolved in tetrahydrofuran (200 mL), treated with water (60 mL), and then concentrated under reduced to remove the tetrahydrofuran. The remaining aqueous material was neutralized with concentrated NH4OH and extracted with ethyl acetate. The ethyl acetate phases were combined, washed with water, brine, dried over Na2SO4 and concentrated under reduced pressure to provide the title compound as yellow flakes (6.92 g, 74%).

4456-77-3 Isoquinoline-1,3(2H,4H)-dione 349435, aisoquinoline compound, is more and more widely used in various fields.

Reference£º
Patent; Lee, Chih-Hung; Bayburt, Erol K.; DiDomenico, Stanley; Drizin, Irene; Gomtsyan, Arthur R.; Koenig, John R.; Perner, Richard J.; Schmidt, Robert G.; Turner, Sean C.; Jinkerson, Tammie K.; Zheng, Guo Zhu; US2005/113576; (2005); A1;,
Isoquinoline – Wikipedia
Isoquinoline | C9H7N – PubChem

 

Some tips on 4456-77-3

4456-77-3 Isoquinoline-1,3(2H,4H)-dione 349435, aisoquinoline compound, is more and more widely used in various fields.

4456-77-3, Isoquinoline-1,3(2H,4H)-dione is a isoquinoline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,4456-77-3

A mixture of isoquinoline-1,3(2H,4H)-dione (preparation 20a, 0.65 g, 4.02 mmol), phosphorous tribromide (1.51 mL, 16.05 mmol) and phosphoric tribromide (1.04 g, 3.61 mmol) was stirred at 180 title compound (0.58 g, 56%) as a white solid.LRMS (m/z): 286/288/290 (M+1)+.1 H NMR (400 MHz, CHLOROFORM-d) delta ppm 7.67 – 7.76 (m, 3 H) 7.84 (s, 1 H) 8.24 (d, J=8.40 Hz, 1 H)

4456-77-3 Isoquinoline-1,3(2H,4H)-dione 349435, aisoquinoline compound, is more and more widely used in various fields.

Reference£º
Patent; Almirall, S.A.; Vidal Juan, Bernat; Forns Berenguel, Maria Pilar; Castillo Mcquade, Marcos; Erra Sola, Montserrat; Mir Cepeda, Marta; EP2441755; (2012); A1;,
Isoquinoline – Wikipedia
Isoquinoline | C9H7N – PubChem

 

Analyzing the synthesis route of 4456-77-3

The synthetic route of 4456-77-3 has been constantly updated, and we look forward to future research findings.

4456-77-3, Isoquinoline-1,3(2H,4H)-dione is a isoquinoline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,4456-77-3

A mixture of homophthalimide (770 mg, 4.78 mmol), 4-pyridinecarboxaldehyde (0.469 mL, 4.78 mmol) and piperidine (0.5 mL) in acetic acid (25 mL) was heated at reflux for 1 h. The resultant solution was cooled to room temperature. The solid product was removed by filtration, washed by water (4¡Á10 mL) and dried under vacuum to afford 920 mg (3.67 mmol, 77% yield ) of a mixture of Z and E isomers of the above compound. 1H-NMR (DMSO-d6) complex proton signals shown in aromatic region due to existence of both E and Z isomers. MS ES 251 (M+H)+, 252 (M+2H)+.

The synthetic route of 4456-77-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Bayer Pharmaceuticals Corporation; US6689883; (2004); B1;,
Isoquinoline – Wikipedia
Isoquinoline | C9H7N – PubChem

 

Brief introduction of 4456-77-3

The synthetic route of 4456-77-3 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4456-77-3,Isoquinoline-1,3(2H,4H)-dione,as a common compound, the synthetic route is as follows.,4456-77-3

b) 1,3-Dibromoisoquinoline; A mixture of isoquinoline-1 ,3(2H,4/-/)-dione (preparation 20a, 0.65 g, 4.02 mmol), phosphorous tribromide (1.51 mL, 16.05 mmol) and phosphoric tribromide (1.04 g, 3.61 mmol) was stirred at 180 C. After 2 hours, the mixture was cooled, poured onto ice- water and 2N aqueous potassium hydroxide was added until the pH was 8-9. The aqueous layer was extracted with toluene, and the organic layer was filtered through neutral alumina and the filtrate was evaporated to give the title compound (0.58 g, 56%) as a white solid.LRMS (m/z): 286/288/290 (M+1)+.1 H NMR (400 MHz, CHLOROFORM-d) delta ppm 7.67 – 7.76 (m, 3 H) 7.84 (s, 1 H) 8.24 (d, J=8.40 Hz, 1 H)

The synthetic route of 4456-77-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ALMIRALL, S.A.; VIDAL JUAN, Bernat; FORNS BERENGUEL, Maria Pilar; CASTILLO MCQUADE, Marcos; ERRA SOLA, Montserrat; MIR CEPEDA, Marta; WO2012/41476; (2012); A1;,
Isoquinoline – Wikipedia
Isoquinoline | C9H7N – PubChem